Originally Posted by **ChipB** Having nothing better to do, I have actually plowed through the document |

Have you really read the document carefully?

It looks that not.

So it is senseless to discuss each nonsense you have written.

Just some points.

1.

About calculating the Efficiency of the Electromagnet (29'424 %).

We also get the same result when using the Joule and Watt (Volts times Amperes, or Joules/Second). Read it again but carefully. Also there is the explanation why we have the same result (29'424 %) in both the cases.

2.

“Your” logic is totally wrong and the Joule is an absolutely wrong unit of measure for Work and Energy.

In order to understand the whole thing you need to first learn about

1.1. Force (What is Force indeed);

1.2. Target Acceleration for each Force;

1.3. Blind Pushing of the gravitational Force;

1.4. Work and Energy in the most general sense;

and only then, relying on this knowledge, learn about

1.5. The New Concept of Work and the New Concept of Energy;

3.

**From the document:**
It’s extremely important to understand that DURING EVERY SECOND of “free falling” the same Energy is required to do the same Work — to increase the velocity of an “free falling” object by the same value of 9.8 m/s.

But the “current” formula for Work and Energy:

W(E)=F*D

erroneously implies that during every second of “free falling” the gravitational Force (F) is doing the different in magnitude Work (W) and that the different in magnitude Energy (E) is being spent on this Work

**since the pushed object is going the different in magnitude Distance (D) during every second**.

And right now below I will give the explanation where

**exactly** is the mistake of modern physics.

Unfortunately, “modern physics” has been incapable to understand

**why exactly the pushed object is going the different in magnitude Distance (D) during every second of “free falling”**.

**The thing is (it’s vitally important to understand) that when “free falling” the pushed object during every second (starting since the 2nd second) is going the Summary Distance (D) as the sum (the result) of these two absolutely different kinds of distances:**
• the Non-Inertial Distance (D1) being gone by the object due to pushing of the gravitational Force (i.e. due to Work of the gravitational Force);

• the Inertial Distance (D2) being gone by the object due only to the object’s motion by inertia.

D =D1+D2

Also it’s important to understand that when an object is moving only by inertia, then, according to Newton’s 1st Law, no Work is being done and no Energy (no resource) is being spent in this process (because when an object is moving only by inertia it is the same thing that the object is being at rest).

But in this “current” formula for Work and Energy:

W(E)=F*D (where, D=D1+D2)

the Inertial Distance (D2) is erroneously included in the calculation and hence erroneously increases the calculated Work (W) of the gravitational Force (F) during the 2nd second and therefore erroneously increases the calculated Energy (E) spent on this Work during the 2nd second.

_____

Just read the whole document again from the very beginning but carefully.

https://medium.com/p/d8919d784567 **My recommendations on how to read the document**:

Start reading.

(This whole work is strictly built on experiments and consistent logical conclusions. Because of that it is very important to read this document from the very beginning, consistently and carefully (step by step, string by string) without any jumping over.)

**As soon as you get to a fragment that you do not understand or that you do not agree with, just write me a note and I will give you additional explanations in extremely simple words.**