Physics Help Forum

Physics Help Forum (http://physicshelpforum.com/physics-help-forum.php)
-   Advanced Mechanics (http://physicshelpforum.com/advanced-mechanics/)
-   -   Submerge planes (http://physicshelpforum.com/advanced-mechanics/14568-submerge-planes.html)

mrmonaro Mar 29th 2018 05:05 PM

Submerge planes
 
1 Attachment(s)
I'm having trouble with the following problem, can anyone help? Refer to attached picture.


A 25-mm thick steel-gate of 15-mx8-m size, specific gravity of 7.8 is hinged, as shown in the figure below, to store flash-flooding water. The density of water, at standard temperature condition, is 990 kg/m3. Compute the water level h for which the gate starts to fall.

HallsofIvy Mar 29th 2018 05:31 PM

The gate "starts to fail" when the total weight of water on the gate is 12500g Newtons. To find the total weight imagine the gate divided into many horizontal strips of with "dx" so area 8dx. At height x, measured along the gate, we are at height $\displaystyle y= x cos(30)= \frac{x\sqrt{3}}{2}$ above the bottom so at depth $\displaystyle h- x cos(30)= h- \frac{x\sqrt{3}}{2}$. The water pressure at that depth, so the force on a unit square on the gate, is the weight of a column of water a unit square of that height- the density of water (1 in grams per cubic cm) times that depth. Multiply that by the area of the strip, 8 dx, and integrate with x from 0 to 15. Set that equal to 1250000g and solve for h.


All times are GMT -7. The time now is 01:06 PM.

Copyright © 2016 Physics Help Forum. All rights reserved.
Copyright © 2008-2012 Physics Help Forum. All rights reserved.